Polarfreeze US 6210 EVO Ni is a silicate- free, phosphate- free mono ethylene glycol based antifreeze concentrate for use in summer and winter with frost and rust protection properties (all- year- round use).

Polarfreeze US 6210 EVO Ni is used as cooling and heat transfer fluid used in combustion engines, in particular for "Heavy Duty" engines.

Characteristics

Effective corrosion protection for all engine metals, including aluminum and iron alloys
Excellent protection against cavitation
Aluminum protection
Uniform and homogeneous protective layer
No gelation and failures

Usage

Polarfreeze US 6210 EVO Ni has been developed as a special high-performance engine coolant which is suitable for engines made of cast iron, aluminum or combinations of the two metals as well as for cooling systems made of aluminum or copper alloys.
Polarfreeze US 6210 EVO Ni is suitable for gasoline, diesel and natural gas engines in vehicles or in industrial applications and is specifically recommended for high performance engines, in which a high-temperature protection for aluminum is of great importance.
Polarfreeze US 6210 EVO Ni meets the coolant TMC RP329 and ASTM D6210 for high performance engines.
It is part of a good maintenance practice to test the nitrite concentration regularly (see OEM recommendations). If the nitrite concentration falls below 800 ppm, a replacement of the product is recommended.
Typical concentrations in northern Europe are 50% Polarfreeze US 6210 EVO Ni and 50% water (recommended: softened water), with a frost protection up to -40 ° C.
Mixtures with more than 70 vol. % of Polarfreeze US 6210 EVO Ni are not recommended as the maximum achievable frost protection (-69 ° C) is reached at 68 vol. % .

Usable for

We recommend this product for:
ASTM	D 6210 Type I-FF
ASTM	D 4985
CATERPILLAR	EC-1
CUMMINS	CES 14603
CUMMINS	CES 14439
CUMMINS	SB366132
CUMMINS	3666286
DETROIT DIESEL	7SE298 M.I. 1784E
FEDERAL SPECIFICATION	A-A-870A
FREIGHTLINER	48-22880
GM	1825M
GM	1899M
GM	6038M
JOHN DEERE	8650-5
MACK	014617004
TMC	RP 329

Miscibility

Polarfreeze US 6210 EVO Ni is miscible with most of the coolants based on ethylene glycol.
For optimum corrosion protection the use pure Antifreeze US 6210 is recommended.
For the preparation of mixtures softened water should be preferred.

Data table

Typical characteristics:

Specific weight at 20°C	kg/m³	1,120
Boiling point	°C	170
ph-value (20°C)		10,5
Nitrites (NO2)	ppm	2300
Molybdenum	ppm	370
Reserve alkalinity		9,5
Colour		pink (violet)

Datenblatt / Sicherheits-Datenblatt / Dokumente:

Product datasheet

Articles

Article No.: STL 3100 515
Packaging unit: Can, 20 Liter

Polarfreeze US 6210 EVO Ni - STL 3100 515 - Can, 20 Liter

Article No.: STL 3100 516
Packaging unit: Drum, 60 Liter

Polarfreeze US 6210 EVO Ni - STL 3100 516 - Drum, 60 Liter

Article No.: STL 3100 518
Packaging unit: Drum, 200 Liter

Polarfreeze US 6210 EVO Ni - STL 3100 518 - Drum, 200 Liter

Article No.: STL 3100 519
Packaging unit: PE-Container, 1000 Liter

Polarfreeze US 6210 EVO Ni - STL 3100 519 - PE-Container, 1000 Liter

Notice:

Our lubricants- and antifreeze-products (except shop items) shall be available for sale to authorized specialist dealers and bulk buyers. For further information please contact the following department: Motor Oils & Lubricants.