CADON FD
Fuel-Economy-Mid SAPS-HC-Synthetic-High-Performance-Motorenoil 0W-30
Customs number: 27101981
Description
CADON FD is a further developed fuel economy Mid Saps HC- synthetic high performance engine oil. Because of the low SAPS content this engine oil is perfectly suitable for vehicles with modern three- way catalysts and diesel particle filters.
CADON FD is recommended for use in Ford engines when the Ford specification WSS-M2C950-A with the viscosity SAE 0W30 is instructed.
Characteristics
- Extrem wear protection
- Excellent viscosity temperature behaviour
- Quick oil feed of critical lubricating points
- Considerable wear reduction on cylinder and camshaft
- High oxidation and temperature stability
- Low volatilization loss
- Very high cleaning capability
- Particularly low emission combustion
- Improved carbon absorption
- Good resistance to bio diesel-shares in the fuel
Effects
- Reduction of fuel consumption on partial and full load operation as well as reduction of exhaust emission
- Excellent cold starting behaviour
- Very good operating reliability
- Optimal engine cleanliness
- Very low oil consumption
- High margin of performance and high product stability, also at extended oil change intervals
- All-year operation
Usable for
SAE | 0W-30 | |
ACEA | C2 | |
We recommend this product for: | |
FIAT | 9.55535-GS1/DS1 | |
FORD | WSS-M2C950-A | |
JAGUAR/LAND ROVER | STJLR.03.5007 | |
Utilization
- High-performance and normal four-stroke petrol engines
- with multivalve-technology
- with turbo charging
- with catalyst technology
- Passenger car-high-performance- and normal four-stroke diesel-engine
- with multivalve technology
- with turbo charging
- with CDi-technology
- with diesel particle systems(DPF)
- with catalyst technology
Disposal
- CADON FD is assigned to category 2 of used oils and thus is free for disposal.
Miscibility
- CADON FD is fully compatible to custumary HD oils and can be mixed without any doubts. However, to take full advantage of CADON FD it is recommendable to use only CADON FD when refilling.
Data table
Typical characteristics: | |
| |
Specific weight at 15°C | kg/m³ | 844 | |
Dynamic viscosity at -35°C | mPa.s | 5620 | |
Viscosity at 40°C | mm²/s | 53,9 | |
Viscosity at 100°C | mm²/s | 10,4 | |
Viscosity index | | 185 | |
Flash point COC | °C | 230 | |
Pourpoint | °C | -45 | |
Sulphate ashes | % | - | |
TBN | mgKOH/g | - | |
Datenblatt / Sicherheits-Datenblatt / Dokumente:
Articles
Article No.: STL 1090 392
Packaging unit: Can, 1 Liter
|
|
Article No.: STL 1090 393
Packaging unit: Can, 4 Liter
|
|
Article No.: STL 1090 394
Packaging unit: Can, 5 Liter
|
|
Article No.: STL 1090 395
Packaging unit: Can, 20 Liter
|
|
Article No.: STL 1090 396
Packaging unit: Drum, 60 Liter
|
|
Article No.: STL 1090 398
Packaging unit: Drum, 200 Liter
|
|
Article No.: STL 1490 399
Packaging unit: PE-Container, 1000 Liter
|
|
|
|
Notice:
Our lubricants- and antifreeze-products (except shop items) shall be available for sale to authorized specialist dealers and bulk buyers.
For further information please contact the following department: Motor Oils & Lubricants.