Polarfreeze US 6210 is a silicate- free, phosphate- free mono ethylene glycol based antifreeze concentrate for use in summer and winter with frost and rust protection properties (all- year- round use).

Polarfreeze US 6210 is used as cooling and heat transfer fluid used in combustion engines, in particular for "Heavy Duty" engines.

Characteristics

Effective corrosion protection for all engine metals, including aluminum and iron alloys
Excellent protection against cavitation
Aluminum protection
Uniform and homogeneous protective layer
No gelation and failures
No calcium deposits

Usage

Polarfreeze US 6210 has been developed as a special high-performance engine coolant which is suitable for engines made of cast iron, aluminum or combinations of the two metals as well as for cooling systems made of aluminum or copper alloys.
Polarfreeze US 6210 is suitable for gasoline, diesel and natural gas engines in vehicles or in industrial applications and is specifically recommended for high performance engines, in which a high-temperature protection for aluminum is of great importance.
Polarfreeze US 6210 meets the coolant TMC RP329 and ASTM D6210 for high performance engines.
It is part of a good maintenance practice to test the nitrite concentration regularly (see OEM recommendations). If the nitrite concentration falls below 800 ppm, a replacement of the product is recommended.
Typical concentrations in northern Europe are 50% Polarfreeze US 6210 and 50% water (recommended: softened water), with a frost protection up to -40 ° C.
Mixtures with more than 70 vol. % of Polarfreeze US 6210 are not recommended as the maximum achievable frost protection (-69 ° C) is reached at 68 vol. % .

Usable for

We recommend this product for:
ASTM	D 6210 Type I-FF
ASTM	D 3306 Type I
ASTM	D 4985
TMC	RP 329
US FEDERAL SPEC.	CID AA 52624-1-A

Miscibility

Polarfreeze US 6210 is miscible with most of the coolants based on ethylene glycol.
For optimum corrosion protection the use pure Antifreeze US 6210 is recommended.
For the preparation of mixtures softened water should be preferred.

Data table

Typical characteristics:

Specific weight at 20°C	kg/m³	1,120
Boiling point	°C	170
ph-value (20°C)		10,5
Nitrites (NO2)	ppm	2300
Molybdenum	ppm	370
Reserve alkalinity		9,5
Colour		pink (violet)

Datenblatt / Sicherheits-Datenblatt / Dokumente:

Product datasheet

Articles

Article No.: STL 3100 495
Packaging unit: Can, 20 Liter

Polarfreeze US 6210 - STL 3100 495 - Can, 20 Liter

Article No.: STL 3100 496
Packaging unit: Drum, 60 Liter

Polarfreeze US 6210 - STL 3100 496 - Drum, 60 Liter

Article No.: STL 3100 498
Packaging unit: Drum, 200 Liter

Polarfreeze US 6210 - STL 3100 498 - Drum, 200 Liter

Article No.: STL 3100 499
Packaging unit: PE-Container, 1000 Liter

Polarfreeze US 6210 - STL 3100 499 - PE-Container, 1000 Liter

Notice:

Our lubricants- and antifreeze-products (except shop items) shall be available for sale to authorized specialist dealers and bulk buyers. For further information please contact the following department: Motor Oils & Lubricants.