Arcticfin XX13 is a full concentrate radiator protection and heat transfer fluid based on 1,2-ethanediol (ethylene glycol, MEG) for summer and winter operation, providing maintenance-free protection against freezing, overheating and rusting.

Arcticfin XX13 is a Lobrid product, which means that it is formulated on the basis of organic inhibitors in combination with inhibitors of mineral (silicate). Therefore, it provides not only maintenance-free protection against freezing and cooking, but also long-term protection against corrosion (Si-OAT-coolant).

Arcticfin XX13 is borate, nitrite, amine and phosphate free.

Characteristics

Longlife radiator protection
Excellent heat transfer
Uniform and homogeneous protective layer
Protection of all metals, including aluminum, due to highly effective additives
Silicate stabilised, i.e. no gel formation or flocculation
Environmentally friendly due to the non-use of borates, nitrites, amines and phosphates

Usage

Arcticfin XX13 can be used without restriction in motors of cast iron, aluminum, or a combination of both metals in cooling systems made of aluminum or copper alloys.

Arcticfin XX13 particularly recommended for aluminum engines, where a special protection at higher temperatures is required.

Arcticfin XX13 offers excellent long-term protection. It is recommended to change the coolant after 6 years or after 250,000 km (whichever comes first).

Recommended concentration is 50% Arcticfin XX13 and 50% water, with a frost protection of
about -35 ° C is reached.

For mixtures with 60 vol.% Arcticfin XX13 approx. -52 ° C are reached. A higher use concentration is not recommended. We recommend the use of demineralised or distilled water.

Special attention must be paid to the measurement of the freezing point.

Refractometers are often used to determine the freezing point. In the case of Arcticfin XX13 this measurement leads to incorrect results. This is due to the glycerol content in the coolant.
Due to the MEG scale of the refractometer the test method described in the ASTM D3321 leads to an incorrect assessment.

In the following table is listed for various dilutions, the measurement data and readings of each corresponding density, the refractive index, and the reading of the Refraktometer *.
The table also shows the different results to the two standard methods of
measuring antifreeze ASTM D3321 and ASTM D 1177.

Usable for

We recommend this product for:
ASTM	D 3306
AUDI, (BENTLEY, BUGATTI, LAMBORGHINI), SEAT, SKODA	G 13
BS	6580 : 2010
VW	TL 774 J (G13)

Miscibility

Arcticfin XX13 is miscible with most of the coolants based on ethylene glycol (MEG). For optimum corrosion protection and effect of the inhibitors to use pure Arcticfin XX13 is recommended. Recommendation in the mixing ratio is 50: 50 (Vol.%). Never use undiluted.

Data table

Typical characteristics:

Specific weight at 20°C	kg/m³	1,110 - 1,160
Boiling Point	°C	170 - 185
ph-value (20°C), 50% aqueous solution		7,5 - 9
Pour point antifreeze/water=1:1 °C		-35
Glycerin	%	10 - 40
Reserve alkalinity		5,0
Colour		pink (violet)

Datenblatt / Sicherheits-Datenblatt / Dokumente:

Product datasheet

Articles

Article No.: STL 3100 212
Packaging unit: Can, 1 Liter

Arcticfin XX13 - STL 3100 212 - Can, 1 Liter

Article No.: STL 3100 213
Packaging unit: Can, 1500 Milliliter

Arcticfin XX13 - STL 3100 213 - Can, 1500 Milliliter

Article No.: STL 3100 214
Packaging unit: Can, 5 Liter

Arcticfin XX13 - STL 3100 214 - Can, 5 Liter

Article No.: STL 3100 215
Packaging unit: Can, 20 Liter

Arcticfin XX13 - STL 3100 215 - Can, 20 Liter

Article No.: STL 3100 216
Packaging unit: Drum, 60 Liter

Arcticfin XX13 - STL 3100 216 - Drum, 60 Liter

Article No.: STL 3100 218
Packaging unit: Drum, 200 Liter

Arcticfin XX13 - STL 3100 218 - Drum, 200 Liter

Article No.: STL 3100 219
Packaging unit: PE-Container, 1000 Liter

Arcticfin XX13 - STL 3100 219 - PE-Container, 1000 Liter

Notice:

Our lubricants- and antifreeze-products (except shop items) shall be available for sale to authorized specialist dealers and bulk buyers. For further information please contact the following department: Motor Oils & Lubricants.