Universal Kühlerschutz BS - Extra
Radiator protection concentrate Colour: red
Customs number: 38200000
Description
Universal Kühlerschutz BS - Extra is a full concentrate radiator protection based on Monoethylene glycol for operation in summer and winter, with frost and rust protection effect (all-year operation).
Universal Kühlerschutz BS - Extra, the high-performance corrosion antifreeze protection for motors and cooling systems meets the modern demands of the development in motor construction.
Universal Kühlerschutz BS - Extra is free of nitrites, amines, phosphates and silicate.
Characteristics
- Protection against corrosion for all parts of the cooling system made of the materials steel, gray iron, aluminium, copper, brass, soft solder.
- Avoidance of cavitation damages, such as on the collant pump
- Compatibility with varnishes
- Compatibility with hose and sealing materials
- Avoidance of sediments, which can cause radiator plugging
- Avoidance of foaming
Usage
Universal Kühlerschutz BS - Extra is because of its specially used additives excellently suitable for aluminium, light alloy and gray iron motors (please observe manufacturer´s service instructions).
Recommended working concentration 50 % Universal Kühlerschutz BS - Extra and 50% water, by which a radiatior protection up to about -38 °C can be achieved. Antifreeze protection down to -69°C is possible with a maximum of 68% Universal Kühlerschutz BS - Extra and 32% water.
Depending on the type and the manufacturer´s instructions the contents of the cooling system shall be replaced every 2 to 3 years.
Usable for
We recommend this product for: | |
AFNOR | NF-R 15-601 Type 1 | |
AS | 2108 | |
ASTM | D 3306 Type 1 | |
BS | 6580 | |
CUNA | NC 956-16 | |
JIS | K 2234 | |
ÖNORM | V 5123 | |
SAE | J 1034 | |
UNE | 26-361 | |
Miscibility
- Universal Kühlerschutz BS - Extra can be mixed with the most of the coolants based on ethylene glycol.
To achieve an optimal corrosion protection and to avoid sludge formation it is recommended to use pure Universal Kühlerschutz BS - Extra. For the preparation of mixtures softened water should be preferred.
Data table
Typical characteristics: | |
| |
Specific weight at 20°C | kg/m³ | 1.110 - 1.140 | |
Flash point COC | °C | >120 | |
Boiling point | °C | 165 | |
ph-value | (33 Vol.%) | 7,5-8,5 | |
Water content | % | <5 | |
Foam behaviour | corresponds | |
Pour point antifreeze/water = 1:1 | °C | -38 | |
Colour | red | |
Datenblatt / Sicherheits-Datenblatt / Dokumente:
Articles
Article No.: STL 3100 192
Packaging unit: Can, 1 Liter
|
|
Article No.: STL 3100 193
Packaging unit: Can, 1500 Milliliter
|
|
Article No.: STL 3100 194
Packaging unit: Can, 5 Liter
|
|
Article No.: STL 3100 195
Packaging unit: Can, 20 Liter
|
|
Article No.: STL 3100 196
Packaging unit: Drum, 60 Liter
|
|
Article No.: STL 3100 198
Packaging unit: Drum, 200 Liter
|
|
Article No.: STL 3100 199
Packaging unit: PE-Container, 1000 Liter
|
|
|
|
Notice:
Our lubricants- and antifreeze-products (except shop items) shall be available for sale to authorized specialist dealers and bulk buyers.
For further information please contact the following department: Motor Oils & Lubricants.